BDMICRO M128 ATMEGA128 Microcontroller RS-232 Display Board MAX232ECWE AT24C256

Description

BDMICRO M128 ATMEGA128 Microcontroller RS-232 Display Board MAX232ECWE AT24C256
ATMEGA128 Summary:
The high-performance, low-power Microchip 8-bit
AVR
RISC-based
microcontroller
combines 128KB of programmable flash memory, 4KB
SRAM
, a 4KB
EEPROM
, an 8-channel 10-bit A/D converter, and a
JTAG
interface for on-chip debugging. The device supports throughput of 16 MIPS at 16 MHz and operates between 4.5-5.5 volts.
By executing instructions in a single clock cycle, the device achieves throughputs approaching 1 MIPS per MHz, balancing power consumption and processing speed.
ATMEGA128 Specifications:
Program Memory Type: Flash
Program Memory Size (KB): 128
CPU Speed (MIPS/
DMIPS
): 16
SRAM
(B): 4,096
Data
EEPROM
/
HEF
(bytes): 4096
Digital Communication Peripherals: 2-UART, 1-
SPI
, 1-I2C
Capture/Compare/
PWM
Peripherals: 2 Input Capture, 2
CCP
, 8PWM
Timers: 2 x 8-bit, 2 x 16-bit
Number of Comparators: 1
Temperature Range (°C): -40 to 85
Operating Voltage Range (V): 2.7 to 5.5
Pin Count: 64
MAX232ECWE Specifications:
Product Category: RS-232 Interface
IC
Mounting Style:
SMD
/
SMT
Series: MAX232
Function: Transceiver
Data Rate: 200
kb
/s
Number of Drivers: 2 Driver
Number of Receivers: 2 Receiver
Supply Voltage - Max: 5.5 V
Supply Voltage - Min: 4.5 V
Operating Supply Current: 10 mA
Minimum Operating Temperature: 0 C
Maximum Operating Temperature: + 70 C
Height: 2.35 mm (Max)
Length: 10.5 mm (Max)
Product: RS-232 Transceivers
Supply Type: Single Supply
Width: 7.6 mm (Max)
Brand: Maxim Integrated
Shutdown: Without Shutdown
Operating Supply Voltage: 5 V
Product Type: RS-232 Interface
IC
Propagation Delay Time: 3.5 us, 1 us
Subcategory: Interface
ICs
AT24C256 Specifications:
-Low-voltage and Standard-voltage Operation
- 2.7 (
VCC
= 2.7V to 5.5V)
-1.8 (
VCC
= 1.8V to 3.6V)
-Internally Organized: 32,768 x 8
-Two-wire Serial Interface
-Schmitt Trigger, Filtered Inputs for Noise Suppression
-Bidirectional Data Transfer Protocol
-1 MHz (5V), 400 kHz (2.7V, 2.5V) and 100 kHz (1.8V) Compatibility
-Write Protect Pin for Hardware and Software Data Protection
-64-byte Page Write Mode (Partial Page Writes Allowed)
-Self-timed Write Cycle (5 ms Max)
-High Reliability – Endurance: One Million Write Cycles – Data Retention: 40 Years
-Extended Temperature and Lead-free/Halogen-free Devices Available
-8-lead
JEDEC
PDIP
, 8-lead
JEDEC
and
EIAJ
SOIC
, 8-lead MAP, 8-lead
TSSOP
, 8-lead SAP and 8-ball dBGA2 Packages
-Die Sales: Wafer Form, Waffle Pack, and Bumped Wafers
New surplus, see photos for details.
XXQXX10
Powered by SixBit's eCommerce Solution